![]() Panels will typically feature four of these at equal distances from each of its corners to guarantee an even distribution of the load. The facade panels are mechanically fixed with specialist undercut anchors. Typically this system can be used in internal reception areas and as part of external insulated panels systems. Where the design of the project necessitates a restricted cavity zone, the horizontal rails of this Strata stone cladding system can be fixed directly to the substrate. Hard & Soft Body Impact test - Safety to Persons to CWCT TN76.Hard & Soft Body Impact test - Retention of Performance to CWCT TN76.Wind Resistance - Safety to CWCT Section 12.Wind Resistance - Serviceability to CWCT Section 11.Water Penetration - Dynamic Pressure to CWCT Section 7.The secret fix undercut system has been tested by Wintech Engineering to CWCT standards for: ![]() The system is suitable for both standard grid and random pattern facades. The secret fix undercut anchor is an ideal support system for a wide range of porcelain, ceramic, technical stone and natural stone panels with a thickness range from 20mm to 50mm. Panel clips create the hook on connection to the horizontal rail which is mechanically fixed at two points for stability and security. Panels will typically feature four undercut anchors at equal distances from each of its corners to guarantee an even distribution of the load. ![]() ![]() The Strata stone panels in this cladding system are supported by specialist undercut anchors.
0 Comments
Leave a Reply. |